WattStopper DT-200 Series Dual Technology Ceiling Sensors

Description

Combines Passive Infrared and Ultrasonic Technologies SmartSet Automatically Selects Optimal Settings for each Space Built-In Light Level Sensor Accepts Low Voltage Switch Input for Manual-On Operation Walk-Through Mode Increases Savings Potential Isolated Relay Allows Sensor to Interface with Building Control Systems
Wattstopper's dt-200 series dual technology ceiling sensors combine pir and ultrasonic technologies into one unit to achieve precise coverage in detecting occupancy. Key features combines passive infrared (pir) and ultrasonic technologies auto set automatically selects optimal settings for each space walk-through mode increases savings potential built-in light level sensor accepts low-voltage switch input for manual-on operation automatic or manual-on operation when used with a bz-150 power pack. General info special features: dual technology, low voltage momentary switch input for manual operation typical applications: open office spaces, computer rooms, conference rooms, classrooms, warehouses technical info IR range on axis: 2000 soft load: 1 amp @ 24 vdc/VAC light output 1Fc D: automatic on/off response time: 5 to 30 minutes Volts: 24 vdc/VAC. Product information: the Wattstopper dt-200 dual technology occupancy sensors combine advanced passive infrared (pir) and ultrasonic technologies into one unit. The combination of these technologies helps to eliminate false triggering problems even in difficult applications. The dt-200 turns lighting systems on and off based on occupancy and ambient light levels. The dt-200 offers numerous operating modes that can be combined to create the ideal custom control. The sensors can be Configured gured to turn lighting on, and hold it on as long as either or both technologies detect occupancy. After no movement is detected for the duration of the time delay (5 to 30 minutes) the lights are switched off. A "walk-through" mode can turn lights off after only 3 minutes, if no activity is detected after 30 seconds of an occupancy detection. The dt-200 operates on 24Vdc supplied by Wattstopper power packs. Dt-200 sensors also have an isolated relay with normally open and normally closed contacts for interfacing with HVAC or EMS.