-40%
Floor Type Manual Cloth Cutting Machine Zigzag Knife Dividing Rule Width 19.6"
$ 400.77
- Description
- Size Guide
Description
Manual Cloth Cutting MachineDebugging Instructions
1. Debugging is required when new assembly or replacement of new backing plates
2. The debugging method is to manually adjust the cutting effect screw, press 1/3 circle each time to debug, and then perform trial cutting.
(Excessive fine-tuning will damage the backing plate)
3. Observe the actual knife marks after trial cutting and pay attention to whether the front and rear ends of the cut are the same. (The middle part will be thinner) The cloth sample can be completely cut off
4. After debugging, fix the lock nut
Specifications
Tooth knife length:500mm(19.7")
Body size:560×700×1100mm(22"*27.6"*43.3")
Workbench area:560+300×600mm
Can be cut depth:15~70mm(0.59"~2.6") about 30-50 layers
Operation mode: Manual
Application Industry
This machine can be widely used in the loading and cutting of various textiles such as cotton, wool, silk, linen, chemical fiber, leather, etc. It is suitable for making various forms of sample cards, color cards, elevator cards, trouser cut edges of trousers, leather, Gift industry processing tooth edge products, etc.
Item Include:
1 set of 50CM Manual Cloth Cutting Machine With Flower Knife(230077)
On Dec-17-20 at 19:47:19 PST, seller added the following information: