220V Infrared Body Motion Radar Sensor PIR Sensing Switch Microwave Detector New

Description

Home
Arduino
Module
Sensor
Chips
About Us
Specification：
Working Voltage: AC 220V 50Hz
Load power: Incandescent lamp ≤ 100W CFL ≤32W
Sensing range: 180x360 °
Sensing range: ≤ 8m
Size：50x36x25mm
Install cable length: 16cm
Ambient temperature: -20 ℃ ~ + 50 ℃
Their power consumption: ≤0.2W
Delay time: 30 seconds
Sensitivity: 7LUX
Detection speed: 0.6-1.5 m / sec
Feature：
Radar switch sensing distance far enough, wide angle, no dead zone, can penetrate glass, and thin wood, depending on the power and can penetrate walls of different thicknesses, from the environment, temperature, dust and other effects, in the case of more than 37 degrees , the sensing range is not shortened, the temperature sensing distance becomes constant. I hope sensing angle a small point, you can set the switch sides of the metal obstruction, or choose our restaurant infrared body sensor switch. Radar can pass through walls of 25cm hollow home.
1. Smart sensor: When someone enters the detection range of the product, the microwave detector operating point lights when people leave the detection range, the light automatically goes off. It can automatically identify day and night.
2. Smart delay: switch after detecting the human body every activity will be automatically extended cycle, and extended time of the last human activities as the starting point.
3. Work: After induction switch is turned on, the delay period, if human activity, the switch will continue on until people leave and extended time.
The photosensitive control: according to the outside light intensity, to control the switch is working to achieve energy savings.
4. Adjustable delay: clockwise, counterclockwise adjustment, 15-30 seconds
Use: hallway, corridor, basement, garage, storage, monitoring and other indoor (outside) energy-saving automatic lighting situations
Note：
1. Disable charged install and operate, load short circuit is strictly prohibited. (Be sure to regulate their own power before the switch, or peril)
2. Do not exceed the load power usage.
3. When the wall thickness of less than 10 cm, the switch is likely to partition induction.
4. In the sensitive area, do not affect its non-stop movement of an object or obstacle detection.
5.When install, metal objects blocking the sensor is prohibited.
Package included：
1x Radar switch
Payment
Shipping
Refund
Payment
We accept PayPal only.
But we only
Accept
your
Ebay Address
,Please Make sure it's 100% right.
Payment must be received in 5 business days of auction closing.
Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
Shipping
Fill your shipping info
Refund
All package need to
wait 30 days
(US only n
eed 7-10 days)
,
Please take care it.Less than 30 days,we can't take a refund
.
If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.